Cell Instruments Co., Ltd.
Material Testing Solutions
Add to Cart
Paper and board edge crush tester is used for the ring crush(RCT) for paper with thickness between 0.15 and 1mm, edge crush(ECT), plybond adhesion (PAT) and flat crush(FCT) test for board.
It can also be used for the compression test (CMT) for tube with diameter less than 60mm.
Paper and board edge crush tester Features
Paper and board edge crush tester Technical data
| Test Range | Model ZNP-01 for Paper: 70~1600 KPa Model BNP-01 for Board: 150 ~5600kpa |
| Force Accuracy | + / - 0.1% or less |
| Resolution | 0.01 KPa |
| Deformation Error | ≤1mm |
| Plates Parallelism | ≤0.25mm |
| Diaphragm resistance | (9±0.2)mm/(30±5)kPa |
| Transmit Hydraulic Volume | 95±5ml/min (for paper) 175±5ml/min (for board) |
| Unit Conversion | Kg/cm2, kpa, LBF/in2 |
| Plate Diameter | upper:30.5±0.1mm, lower: 33.5±0.1mm (for paper) upper:31.5±0.1mm, lower: 31.5±0.1mm (for board) |
| Clamping Force | 100kpa~1200kpa(adjustable) |
Standard
ISO 12192, ISO 3035, ISO 3037, ISO 7263